Using Ghost 3.0 and imaging identical (same model, manufacturer, etc.) systems using Ghostcast Multicast, WinPE 5.0.
The source image comes from an identical system as those being imaged.
I used Ghostcast to image 4-5 identical systems simultaneously. All are already licensed Windows 10 systems.
Before the Ghostcast process began, I was prompted "The source is MBR and was captured on a BIOS system. The destination system appears to be UEFI, convert destination disk to GPT?"
Thought this was strange due to the fact that these were all identical systems, same model and manufacturer. I clicked "Yes" and continued, successfully, through the Ghosting process. Then I reset the systems after completing the Ghostcast and they are now stuck in a power cycle. Power up, black screen, power down. Rinse, repeat.
I'm in the middle of re-creating the image for each machine individually. I'm curious as to why this kind of error occured. Any kind of input is welcome. Any other additional information needed I can supply happily.
Thanks.